2
Yes
None
1
1000000
Name...
/home/index.php/our-products/
Thumbnail

Categories:

Cheater Racing Cheater Sauce (Extreme) (4oz)
11.99
Cheater Racing Cheater Sauce (Extreme) (4oz) Image

Cheater Racing Cheater Sauce Extreme blend is a specially formulated tire sauce that was formulated to deliver maximize traction in low grip track conditions, as well as help to speed up tire break in. This race proven blend is packaged in a handy 4 ounce bottle with dispenser tip, and is the perfect tuning option to keep on hand when you need more traction than the Original blend can deliver. 

Combine the benefits of both Cheater Wash and Cheater Sauce for ultimate traction! 

  1. Dilute Cheater Wash in your tire wash bucket, wash tire as usual.  Dry completely.
  2. Apply Cheater Sauce approximately 15-20 minutes before your race.
  3. Allow to dry almost completely before running.
  4. After your race, repeat the process. Note that Cheater Wash may give enough traction in some situations, where saucing is not needed.
Cheater Racing Cheater Sauce (Original) (4oz)
11.99
Cheater Racing Cheater Sauce (Original) (4oz) Image

Cheater Racing Cheater Sauce Original blend is a specially formulated tire sauce that was formulated maximize traction. This race proven blend is packaged in a handy 4 ounce bottle with dispenser tip, and it conditions your tires for a consistent traction increase, while at the same time helping to minimize tire wear. 

Combine the benefits of both Cheater Wash and Cheater Sauce for ultimate traction! 

  1. Dilute Cheater Wash in your tire wash bucket, wash tire as usual.  Dry completely.
  2. Apply Cheater Sauce approximately 15-20 minutes before your race.
  3. Allow to dry almost completely before running.
  4. After your race, repeat the process. Note that Cheater Wash may give enough traction in some situations, where saucing is not needed.
Cheater Racing Nitro Wash (6oz)
11.99
Cheater Racing Nitro Wash (6oz) Image

Nitro Wash was specifically designed for the tough grime found on nitro and outdoor cars. Simply spray onto car, body, or tires and watch as Nitro Wash melts away the dirt. Then blow off or wash with water for a clean car with that new car shine!

This 6 oz. bottle is concentrated and is meant to be diluted with water to create a 32oz amount for your bucket or spray bottle. 

Cheater Racing Cheater Wash (6oz)
11.99
Cheater Racing Cheater Wash (6oz) Image

Cheater Racing Cheater Wash is a concentrated 2 in 1 formula that not only cleans your tires, but also conditions them. Plus, it can be used as an all purpose cleaner to help remove dirt that is stuck on your equipment, and gives bodies and wings a nice shine.  

Combine the benefits of both Cheater Wash and Cheater Sauce for ultimate traction! 

  1. Dilute Cheater Wash in your tire wash bucket, wash tire as usual.  Dry completely.
  2. Apply Cheater Sauce approximately 15-20 minutes before your race.
  3. Allow to dry almost completely before running.
  4. After your race, repeat the process. Note that Cheater Wash may give enough traction in some situations, where saucing is not needed.
Cheater Racing Associated 3D Printed Front Wing Mount
9.49
Cheater Racing Associated 3D Printed Front Wing Mount Image

Cheater Racing is proud to introduce their own twist on the ‘lower’ front wing mount. Made from a flexible 3d printed material, the mount is the perfect balance of flex for durability and rigidness for performance.

For use with the B6, B6D, and B5M.

Cheater Racing B6/B6D 3D Printed Bulkhead Shim Set (Black)
4.99
Cheater Racing B6/B6D 3D Printed Bulkhead Shim Set (Black) Image

The Cheater Racing B6D 3D Printed Bulkhead Shim Set includes one 1.0mm shim, and one .5mm shim that can be used to raise the front bulkhead to help increase front end grip and give you more front end tuning options.

Cheater Racing Dauber Cap
1.99
Cheater Racing Dauber Cap Image

The Cheater Racing Dauber Cap conveniently screws onto your existing Cheater Sauce bottles after removing the dropper that comes on the bottles. The included white and red label sticker sheet allows you to color code the lid to match your Cheater Sauce collection! White = Original, Red = Extreme.

Cheater Racing Slipper Eliminator Kit
13.99
Cheater Racing Slipper Eliminator Kit Image

The Cheater Racing Slipper Eliminator Kit is one of the lightest slipper lockers on the market, as well as one of the most simple. The 3D printed parts weigh 1.5 grams, fit all Schelle and AVID Spur gears (48p and 64p), and the kit includes the back plate and front plate. All you need to finish it off is the gear and a nut. Spring, plates, and pads are not required.

B64 'Top' Fan Mount
8.50
B64

Cheater Racing is here to offer a ‘minimalist’ design to mount any 30mm fan directly above the motor on the Team Associated B64 and B64D. This design works with ANY 30x30x10 fan, as well as the popular ‘WTF’ fans. Attaches using regular 3mm hardware.

Cheater Racing Associated 3D Printed Front Wing Mount
9.49
Cheater Racing Associated 3D Printed Front Wing Mount Image

Cheater Racing is proud to introduce their own twist on the ‘lower’ front wing mount. Made from a flexible 3d printed material, the mount is the perfect balance of flex for durability and rigidness for performance.

For use with the B6, B6D, and B5M.

Cheater Racing Cheater Sauce (Ultimate)
11.99
Cheater Racing Cheater Sauce (Ultimate) Image

Cheater Sauce Ultimate blend is a specially formulated on road tire sauce that was developed to maximize traction in low grip track conditions, as well as help to speed up tire break in. This race proven blend is packaged in a handy 4 ounce bottle with dispenser tip, and is the perfect tuning option to keep on hand when you need more traction.  

Cheater Racing Cheater Sauce (Extreme) (4oz) Image
Cheater Racing Cheater Sauce (Extreme) (4oz)
Cheater Racing Cheater Sauce Extreme blend is a specially formulated tire sauce that was formulated to deliver maximize traction in low grip track conditions, as well as help to speed up tire break in. This race pr... Read More
11.99
Cheater Racing Cheater Sauce (Original) (4oz) Image
Cheater Racing Cheater Sauce (Original) (4oz)
Cheater Racing Cheater Sauce Original blend is a specially formulated tire sauce that was formulated maximize traction. This race proven blend is packaged in a handy 4 ounce bottle with dispenser tip, and it condit... Read More
11.99
Cheater Racing Nitro Wash (6oz) Image
Cheater Racing Nitro Wash (6oz)
Nitro Wash was specifically designed for the tough grime found on nitro and outdoor cars. Simply spray onto car, body, or tires and watch as Nitro Wash melts away the dirt. Then blow off or wash with water for a clean ca... Read More
11.99
Cheater Racing Cheater Wash (6oz) Image
Cheater Racing Cheater Wash (6oz)
Cheater Racing Cheater Wash is a concentrated 2 in 1 formula that not only cleans your tires, but also conditions them. Plus, it can be used as an all purpose cleaner to help remove dirt that is stuck on your equipment, ... Read More
11.99
Cheater Racing Associated 3D Printed Front Wing Mount Image
Cheater Racing Associated 3D Printed Front Wing Mount
Cheater Racing is proud to introduce their own twist on the ‘lower’ front wing mount. Made from a flexible 3d printed material, the mount is the perfect balance of flex for durability and rigidness for performance. For... Read More
Cheater Racing B6/B6D 3D Printed Bulkhead Shim Set (Black) Image
Cheater Racing B6/B6D 3D Printed Bulkhead Shim Set (Black)
The Cheater Racing B6D 3D Printed Bulkhead Shim Set includes one 1.0mm shim, and one .5mm shim that can be used to raise the front bulkhead to help increase front end grip and give you more front end tuning options... Read More
Cheater Racing Dauber Cap Image
Cheater Racing Dauber Cap
The Cheater Racing Dauber Cap conveniently screws onto your existing Cheater Sauce bottles after removing the dropper that comes on the bottles. The included white and red label sticker sheet allows you to color co... Read More
Cheater Racing Slipper Eliminator Kit Image
Cheater Racing Slipper Eliminator Kit
The Cheater Racing Slipper Eliminator Kit is one of the lightest slipper lockers on the market, as well as one of the most simple. The 3D printed parts weigh 1.5 grams, fit all Schelle and AVID Spur gears (48p and ... Read More
13.99
B64
B64 'Top' Fan Mount
Cheater Racing is here to offer a ‘minimalist’ design to mount any 30mm fan directly above the motor on the Team Associated B64 and B64D. This design works with ANY 30x30x10 fan, as well as the popular ‘WTF’ fans. Attaches using ... Read More
Cheater Racing Associated 3D Printed Front Wing Mount Image
Cheater Racing Associated 3D Printed Front Wing Mount
Cheater Racing is proud to introduce their own twist on the ‘lower’ front wing mount. Made from a flexible 3d printed material, the mount is the perfect balance of flex for durability and rigidness for performance. For... Read More
Cheater Racing Cheater Sauce (Ultimate) Image
Cheater Racing Cheater Sauce (Ultimate)
Cheater Sauce Ultimate blend is a specially formulated on road tire sauce that was developed to maximize traction in low grip track conditions, as well as help to speed up tire break in. This race proven blend is packaged in a hand... Read More
11.99